ITEEA

Safety Tests

Additional Resources

Teacher Resources

Contact Info

Belt/Disc Sander Safety Test

Directions:
Using the drop down menus, select the correct part name that each arrow is pointing to on the machine. Be sure to select a name for each part. Do not use the same part name twice.


 

 

 


 

 

 
 




Directions:
Read each statement carefully and decide if it is True or False. Be sure to answer all questions. When finished, enter your FIRST AND LAST NAME along with your teacher's email address and click the submit button.

6. Remove jewelry, eliminate loose clothing, and confine long hair before using the belt or disc sander.

7. It does not matter if the belt is torn.

8. Hold material loosely while sanding.

9. The disc should not be clogged.

10. Proper ANSIZ87.1 marked eye protection should be worn at all times.

11. It does not matter what side of the disc you sand on.

12. Table should be tilted while the machine is running.

13. Do not force material against the sanding surfaces.

14. Keep your fingers away from the belt and disc.

15. Leave the sander running and walk away when finished.


Read the following information, check the I agree box, fill in your name and instructor's email, then click the submit button to send the test score to your instructor.

I acknowledge that by submitting this form I am confirming that I am the person who's name is entered below. I further acknowledge that I did not use any resources or receive any assistance during the completion of this test.

I Agree

Your name:

Instructor's email:

Created by Tyler S. Love

Copyright © 2000/2006/2014 by the International Technology and Engineering Educators Association. All rights reserved. Except as permitted under the United States Copyright Act of 1976, no part of this publication may be reproduced or distributed in any form or by any means, or stored in a database or retrieval system without the prior written permission of the publisher.