1. Select Answer Cutterhead Guard Fence Fence Lock Outfeed Table Power Switch

2. Select Answer Cutterhead Guard Fence Fence Lock Outfeed Table Power Switch

3. Select Answer Cutterhead Guard Fence Fence Lock Outfeed Table Power Switch

  
4. Select Answer Cutterhead Guard Fence Fence Lock Outfeed Table Power Switch

5. Select Answer Cutterhead Guard Fence Fence Lock Outfeed Table Power Switch

Directions:
Read each statement carefully and decide if it is True or False. Be sure to answer all questions. When finished, enter your FIRST AND LAST NAME along with your teacher's email address and click the submit button.

6. The guard should be covering the cutterhead even when the machine is not operating.
6. Select Answer True False

7. Do not place your hand within 12 inches of the cutterhead.
7. Select Answer True False

8. Stand directly behind the path of the board when cutting.
8. Select Answer True False

9. Jointing boards with nails or staples sticking out is allowed.
9. Select Answer True False

10. Run the board half way through and lift the board up.
10. Select Answer True False

11. Material should be pulled through the jointer.
11. Select Answer True False

12. Concave side should be face down when jointer.
12. Select Answer True False

13. A push stick is never needed.
13. Select Answer True False

14. The infeed table should be lowered 1 inch per passing cut.
14. Select Answer True False

15. Removal of chips and sawdust should be done when the power is off and the cutterhead has completely stopped.
15. Select Answer True False