1. Select Answer Bed Tailstock Lock Tailstock Spindle Lock Tool Rest Height Adjustment Tool Rest Lock

2. Select Answer Bed Tailstock Lock Tailstock Spindle Lock Tool Rest Height Adjustment Tool Rest Lock

3. Select Answer Bed Tailstock Lock Tailstock Spindle Lock Tool Rest Height Adjustment Tool Rest Lock

4. Select Answer Bed Tailstock Lock Tailstock Spindle Lock Tool Rest Height Adjustment Tool Rest Lock

  
5. Select Answer Bed Tailstock Lock Tailstock Spindle Lock Tool Rest Height Adjustment Tool Rest Lock

Directions:
Read each statement carefully and decide if it is True or False. Be sure to answer all questions. When finished, enter your FIRST AND LAST NAME along with your teacher's email address and click the submit button.

6. Remove jewelry, neckties, loose clothing, and confine long hair.
6. Select Answer True False

7. Reach over the stock while it is spinning.
7. Select Answer True False

8. Do not clamp the tailstock to allow for stock expansion.
8. Select Answer True False

9. Perform roughing and beginning cuts at high speeds.
9. Select Answer True False

10. Make sure the stock clears the tool rest prior to beginning.
10. Select Answer True False

11. Adjust the tool rest while the stock is still spinning.
11. Select Answer True False

12. Set the tool rest 1/4 of an inch from the stock, and 1/8 of an inch above the center of the stock.
12. Select Answer True False

13. Hold the tools loosely against the tool rest.
13. Select Answer True False

14. Remove the tool rest for all sanding operations.
14. Select Answer True False

15. Tools should be left on the bed while in operation.
15. Select Answer True False